;========================================================== ; GSD-File for ARE /PFB systems AEG Identifikationssysteme GmbH ; Auto_Baud_supp, 12MBaud ; ; Release : 09.11.00 gz/le ; File : AEG_0590.GSD ;=========================================================== #Profibus_DP ; Unit-Definition-List: GSD_Revision = 2 ; GSD Data Format Vendor_Name = "AEG Identifikationssysteme GmbH" Model_Name = "ARE /PFB" ;certified as "ARE I2-X1/PFB-24V" Revision = "V1.0" ; Revision of DP-Slave Ident_Number = 0x0590 Protocol_Ident = 0 ; 0: Profibus DP protocol Station_Type = 0 ; 0: DP slave FMS_supp = 0 ; DP slave no FMS support Hardware_Release = "V 002" ; Hardware Revision Software_Release = "V1.20" ; Firmware Revision Nov. 08-2000 ; 9.6_supp = 1 19.2_supp = 1 93.75_supp = 1 187.5_supp = 1 500_supp = 1 1.5M_supp = 1 3M_supp = 1 6M_supp = 1 12M_supp = 1 MaxTsdr_9.6 = 60 MaxTsdr_19.2 = 60 MaxTsdr_93.75 = 60 MaxTsdr_187.5 = 60 MaxTsdr_500 = 100 MaxTsdr_1.5M = 150 MaxTsdr_3M = 250 MaxTsdr_6M = 450 MaxTsdr_12M = 800 ; Redundancy = 0 ; not supported Repeater_Ctrl_Sig = 0 ; not supported 24V_Pins = 0 ; not supported ; ; Slave-Specification: Implementation_Type = "SPC3" Freeze_Mode_supp = 0 ; not supported Sync_Mode_supp = 0 ; not supported Auto_Baud_supp = 1 ; autobaud detection supported Set_Slave_Add_supp = 0 ; not supported Min_Slave_Intervall = 6 ; Modular_Station = 1 ; 1: modular station Max_Module = 1 ; Max_Input_Len = 16 ; max. output data lenght Max_Output_Len = 16 ; max. input data lenght Max_Data_Len = 32 ; output + input data lenght ; ; Module-Definitions: ; Max_Diag_Data_Len = 6 ; 6: only the standard 6 Bytes Fail_Safe = 0 ; not supported Modul_Offset = 255 ; slot number for configuration tool Slave_Family = 11 ; 11: ident-system ; Module = "16 Byte In, 16 Byte Out" 0x1F,0x2F EndModule